Cannot perform GLA update following disk change

[kevin906]

HD/CF assembly was swapped out due to all A1H11 partitions constantly in DEFECT status.
New drive has corrected this issue. All is well except I am unable to perform a GLA update.
Each time I attempt GLA update the system logs the errors seen below.
The GLA partition ends up inconsistent. I have performed STA-INIT multiple times which
does get the partition back in service but after each GLA update attempt it goes back to inconsistent status.
I have performed a successful COPY-DDRSM:A1,1,E,1,J; which completes with no problem.
This must have something to do with swapping the disk. The error messages are referencing
not being able to find the files backup/data_GLA to delete which is understandable since this
drive never had a GLA performed. The other error refers to RMXVCOPY bombing out after transferring
34304 bytes of data with error code 0x6. Cryptic.


pid=16453
16453: command: /opt/hbr/rmx/rmx_backup_restore -t gla -c copy -A HD-PDS GLA
16453: Started at: Wed Oct 9 13:48:45 CDT 2013
16453: p_ufamos DISP-DDSM:A1,HD,1;
16453: /opt/bin/uricmd SFBACKUP rmxinfo :a1h1e: -s
16453: uricmd status=0
16453: /opt/bin/uricmd SFBACKUP rmxdel :GLA:backup/date_GLA
16453: /opt/bin/uricmd SFBACKUP rmxdel :GLA:backup/date_GLA (return: 60)
16453: 060 Unable to delete file
Unable to open rmx file :A1H1J:BACKUP/DATE_GLA
RMXDEL error occurred
16453: uricmd status=60
16453: /opt/bin/uricmd SFBACKUP rmxdel :a1h1e:backup/date_GLA
16453: /opt/bin/uricmd SFBACKUP rmxdel :a1h1e:backup/date_GLA (return: 60)
16453: 060 Unable to delete file
Unable to open rmx file :A1H1E:BACKUP/DATE_GLA
RMXDEL error occurred
16453: uricmd status=60
16453: /opt/bin/uricmd SFBACKUP rmxvcopy :a1h1e: :GLA:
16453: /opt/bin/uricmd SFBACKUP rmxvcopy :a1h1e: :GLA: (return: 64)
16453: 064 Unable to copy area
DoWrite ERROR: errno = 0x6, ByteCount=0, bytes(transfered) = 34304
RMXVCOPY error occurred
DoWrite: No such device or address
034 Area :A1H1J: cannot be switched on
16453: uricmd status=64
gla handling error (copy DS: to :GLA
16453: Exit: 19 64 at: Wed Oct 9 13:49:15 CDT 2013
#

REG-DDSM;
H500: AMO DDSM STARTED
ADD-DCSM:A1,1,HD,"STDH4";
ADD-DASM:A1,1,3200&992&2400&1120&32767&3200&9868,4096&4096&4096&4096&4096&4096&4096;
ADD-DLSM:A1,1,E,"DS:";
ADD-DLSM:A1,1,F,"BDA:"&"BD:"&":TMD:"&"AS:"&":AMD:"&"MP:";
ADD-DLSM:A1,1,G,":CGD:";
ADD-DLSM:A1,1,H,"MS:"&"SY:";
ADD-DLSM:A1,1,I,":SCR:";
ADD-DLSM:A1,1,J,":GLA:";
ADD-DLSM:A1,1,K,"IAG:";
ADD-DCSM:A1,6,HD,"CF1G3";
ADD-DASM:A1,6,3200&992&800&1120&12817,4096&4096&4096&4096&4096;
ADD-DLSM:A1,6,E,"DS:";
ADD-DLSM:A1,6,F,"BDA:"&"BD:"&":TMD:"&"AS:"&":AMD:"&"MP:";
ADD-DLSM:A1,6,G,":CGD:";
ADD-DLSM:A1,6,H,"MS:"&"SY:";
ADD-DLSM:A1,6,I,":MOD-SCR:";
AMO-DDSM -111 DISK STATUS
REGENERATE COMPLETED;


DIS-DDSM:A1;
H500: AMO DDSM STARTED
CONTROLLER: 1 IS ACTIVE LOAD DEVICE, LOAD AREA IS: DS:
TYPE: HD SS-NO : <STDH4> SIZE : 3346 MB ( 53550*64KB) GRAN : 512
AREA: A NAME : A1H1A STATUS : I N S E R V I C E
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H1E STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
ACTIVATED LOGICAL NAMES:
DS:
AREA-SZ: 200 MB (3200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H1F STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
ACTIVATED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
AREA-SZ: 62 MB (992 *64KB) A-GRAN: 4096
AREA: G NAME : A1H1G STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
ACTIVATED LOGICAL NAMES:
:CGD:
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H1H STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
ACTIVATED LOGICAL NAMES:
MS:,SY:
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H1I STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:SCR:
ACTIVATED LOGICAL NAMES:
:SCR:
AREA-SZ: 2047 MB (32767*64KB) A-GRAN: 4096
AREA: J NAME : A1H1J STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:GLA:
ACTIVATED LOGICAL NAMES:
:GLA:
AREA-SZ: 200 MB (3200 *64KB) A-GRAN: 4096
AREA: K NAME : A1H1K STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
IAG:
ACTIVATED LOGICAL NAMES:
IAG:
AREA-SZ: 616 MB (9868 *64KB) A-GRAN: 4096
CONTROLLER: 6
TYPE: HD SS-NO : <CF1G3> SIZE : 1183 MB ( 18932*64KB) GRAN : 512
AREA: A NAME : A1H6A STATUS : B L O C K E D B Y A M O
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H6E STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 200 MB (3200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H6F STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 62 MB (992 *64KB) A-GRAN: 4096
AREA: G NAME : A1H6G STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 50 MB (800 *64KB) A-GRAN: 4096
AREA: H NAME : A1H6H STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H6I STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:MOD-SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 801 MB (12817*64KB) A-GRAN: 4096
AMO-DDSM -111 DISK STATUS
DISPLAY COMPLETED;
<

 

[sbcsu]

Do not do a STA-INIT on a drive that is in use apart from an MO or Flash Drive.

To copy to the GLA

The Area J has to be deactivated before you can copy to it.

DEA-DSSM:A1,1,J;

Then

EXE-UPDAT:BP,ALL;
EXE-UPDAT:A1,ALL;
DEA-DSSM:A1,1,J;
COPY-DDRSM:A1,1,E,1,J,N;


You could also add this as a CRON command.