A few days back I ran into problem with scoadmin
After following advise as posted by various on this
list, I had to resolve to rebooting server.
I rebooted last night. scoadmini works but one of
the problem, which only started happening after
running authck -a -v, priority and fixmog (I also
ran verify normal system state QUICK).
I remember it saying that permission for sendmail.cf
and Systems were not correct and I think it changed
them to what they are now ...
Since then, sendmail now gives us this error
sendmail.cf: line 62: fileclass: cannot open /usr/lib/uucp/Systems: Permission denied
-rw------- 1 uucp uucp 3598 Sep 26 2001 Systems@
The linked file looks like this
/var/opt/K/SCO/Unix/5.0.6Ga/usr/lib/uucp
-rw------- 1 uucp uucp 3598 Sep 26 2001 Systems
Here is what sendmail.cf looks like
-rw-r--r-- 1 root sys 30627 Apr 24 2003 sendmail.cf
I do not want to change permission around and cause an even
greater problem. I do not know what these files were set to nor what they should be set if not as above.
I do need to know what to set these files to so that sendmail starts working again ... or is the message saying one thing while the problem lies else where ???
Thank you all in advance!
KNOWLEDGE: Something you can give away endlessly and gain more of it in the process! - Jose Lerebours
After following advise as posted by various on this
list, I had to resolve to rebooting server.
I rebooted last night. scoadmini works but one of
the problem, which only started happening after
running authck -a -v, priority and fixmog (I also
ran verify normal system state QUICK).
I remember it saying that permission for sendmail.cf
and Systems were not correct and I think it changed
them to what they are now ...
Since then, sendmail now gives us this error
sendmail.cf: line 62: fileclass: cannot open /usr/lib/uucp/Systems: Permission denied
-rw------- 1 uucp uucp 3598 Sep 26 2001 Systems@
The linked file looks like this
/var/opt/K/SCO/Unix/5.0.6Ga/usr/lib/uucp
-rw------- 1 uucp uucp 3598 Sep 26 2001 Systems
Here is what sendmail.cf looks like
-rw-r--r-- 1 root sys 30627 Apr 24 2003 sendmail.cf
I do not want to change permission around and cause an even
greater problem. I do not know what these files were set to nor what they should be set if not as above.
I do need to know what to set these files to so that sendmail starts working again ... or is the message saying one thing while the problem lies else where ???
Thank you all in advance!
KNOWLEDGE: Something you can give away endlessly and gain more of it in the process! - Jose Lerebours