Cannot delete virtual d-channel

[terrysdavid]

Hi,
I'm having trouble deleting a virtual d-channel. This is a new system that we recently used for some training. (CS1000 Rls 7.5 - MG1010). I removed all the trunks and routes from the system, but I cannot remove the d-channel in ld 17. The system is telling me that ISL trunks still exists cannot remove d-channel.

Any suggestions.
Terry

 

[Reusser]

Assuming you have verified
LD 22
REQ: LTM

Also it is possible to have more than one virtual route sharing the same DChannel

Also verify it is disabled

 

[terrysdavid]

I had disabled the d-channel in ld 96 before attempting to remove it. Also, the ltm doesn't show anything since all routes and trunks were removed.

 

[Reusser]

You may have some corruption - a sysload would clear.

When you remove the last virtual trunk, the DCHannel will disable. Since you had to disable, it sees virtual trunks still there.

 

[Firebird Scrambler]

Do you have more than 1 customer?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[terrysdavid]

No.It's just customer zero.