Hello,
I am performing a restore to a test server from a production server on an SAP/Informix on Alphaserver/TRU64.
My onconfig settings for production:
TAPEBLK 256
TAPESIZE 40000000
BAR_MAX_BACKUP 6
The setting for the destination server is similar.
On the restore process the tape with the header is loaded and the server starts the browse process.
Eventually the browse process ends and the following erro is returned:
nsrd: media notice: Volume "002729" on device "rd=explorer:/dev/nrmt3h": Cannot decode block. Verify the device configuration. Tape positioning by record is disabled.
I am using Legato 6.1 with a TL896 autoloader with TZ89 drives.
Any help is appreciated.
Thanks,
sapbrat
I am performing a restore to a test server from a production server on an SAP/Informix on Alphaserver/TRU64.
My onconfig settings for production:
TAPEBLK 256
TAPESIZE 40000000
BAR_MAX_BACKUP 6
The setting for the destination server is similar.
On the restore process the tape with the header is loaded and the server starts the browse process.
Eventually the browse process ends and the following erro is returned:
nsrd: media notice: Volume "002729" on device "rd=explorer:/dev/nrmt3h": Cannot decode block. Verify the device configuration. Tape positioning by record is disabled.
I am using Legato 6.1 with a TL896 autoloader with TZ89 drives.
Any help is appreciated.
Thanks,
sapbrat