Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot connect to wireless network

Status
Not open for further replies.

LadySlinger

IS-IT--Management
Nov 3, 2002
617
US
Both are brand new items.

I have a brand-spankin' new HP Pavilion that has a Ralink 802.11n internal wireless card and Vista Home Premium. The system type is 64-bit OS. Drivers for the wireless card were last updated August 2008.

Since my previous router did not support 802.11n, I purchased a new router that did support 802.11n in addition to 802.11g for my other devices. The network is set up for WPA-personal and the router generated the key (which I copied and pasted to notepad and a USB drive).

My current issue is that the computer barely detects the network. I maybe get one pip and that's it. The wireless router is probably 15 feet away (give or take a couple of feet) in the next room. I am currently posting this message on my laptop, which has an 802.11g card at all pips (Excellent).

I have moved the router around and moved the computer around in the event that something was blocking the two items from talking.

Any alternative ideas for me to try? I'd hate to return the computer as there is 7 GB of RAM install...but will if its the cause of my headache.
 
It sounds almost as if the aerial isn't connected properly on the board. You'd need to open the chassis to check that, so I'd personally get it replaced under warranty,

"We can categorically state that we have not released man-eating badgers into the area" - Major Mike Shearer
 
Try temporarily knocking off the WPA security on the router just to check that isn't causing an issue. Also might be worth choosing a completely different WiFi channel number on the router, just to rule out any incompatibility.

Failing that, I think it's back to the supplier...

ROGER - G0AOZ.
 
You could also try knocking the router to G. Depending on wireless devices in the home (i.e cordless phones operating on 2.4Ghz or other interfering devices running on 2.4Ghz) there is a potential for interference.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top