Cannot connect after a week

[marcosia]

Hi,

I have a server with a modem that permit me to connect remotely to the server to manage it with Terminal Services. After I restart the server I can connect to the server remotely for a few days. After I receive this error:

TCP/IP CP reported error 733: your computer and remote computer could not agree on PPP control protocol

I have disable on the client the Negotiate multi-link for single link connections option and the Enable PPP LCP extension option. But this don't resolve the problem even because for me succed something on the server and not on the client. I want to puntualize that every client have the same problem after a few days from reboot.

What can I check on the server?

Thanks!

Marco Livrieri

 

[ChicagoTechNet]

quoted from

http://www.chicagotech.net/

Error 733: the PPP control protocol for this network protocol is not available on the server.

Resolution:
1) Ensure that the TCP/IP protocol is installed on your RAS server and that the TCP/IP protocol is selected in the Server Settings of the Network Configuration option of the Remote Access Setup dialog.
2) If you have the "Use DHCP to assign remote TCP/IP client addresses" option selected for the TCP/IP protocol in the RAS Server Settings, then ensure that you have installed DHCP and that it is not disabled.
3) Ensure that all of the bindings for TCP/IP are enabled in the Bindings tab of the Network dialog of the Control Panel. Be sure to inspect the TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all protocols, and all services. If the TCP/IP bindings are corrupt, you may have to reinstall TCP/IP and or RAS in order to clean up the bindings.



Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at

http://www.ChicagoTech.net