Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot change File Server address to program VPN Remote phone

Status
Not open for further replies.

mgraval

Programmer
Jun 28, 2006
65
US
All of a sudden, I cannot interrupt the boot process (* to program) and change the File Server Address to point the phone to a TFTP server that I have set up with VPN Remote firmware to convert the phone to a VPN phone. I can change the address, but once the phone reboots, it ignores the entry I have made it just points back to my HTTPS server address of my 8710 that is defined in my 176 scope option of my DHCP server. I have successfully reprogrammed phones numerous times in past, and it was never a problem, until now. As a work around, the only way I can program a VPN phone is to change the TLSSVR value in scope option 176 on the DHCP server to point to my TFTP server. Any entry I make on the phone manually gets ignored. What would prevent me from forcing the phone to another File Server Address? Any input would be greatly appreciated.
 
The phone is in group 876

Change your 46xxsettings.txt and add a group 876 in it and define your http server in it
You can not set a tftp but http works also
See the example

IF $GROUP SEQ 10 goto GROUP10
IF $GROUP SEQ 20 goto GROUP20
IF $GROUP SEQ 30 goto GROUP30
IF $GROUP SEQ 40 goto GROUP40
{specify settings unique to Group 0}
goto END
# GROUP10
{specify settings unique to Group 10, for example}
SET COVERAGEADDR "22000"
SET SIPPROXYSRVR "{IP Address of server1}"
SET SIPREGISTRAR "{IP Address of server1}"
goto END
# GROUP20
{specify settings unique to Group 20, for example}
SET COVERAGEADDR "23000"
SET SIPPROXYSRVR "{IP Address of server1}"
SET SIPREGISTRAR "{IP Address of server1}"
goto END
# GROUP30
{specify settings unique to Group 30, for example}
SET COVERAGEADDR "22000"
SET SIPPROXYSRVR "{IP Address of server2}"
SET SIPREGISTRAR "{IP Address of server2}"
goto END
# GROUP40
{specify settings unique to Group 40, for example}
SET COVERAGEADDR "23000"
SET SIPPROXYSRVR "{IP Address of server2}"
SET SIPREGISTRAR "{IP Address of server2}"
goto END
# END

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top