Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cannot boot after Adaptec 2906 SCSI Card
- Thread starter Rock2447
- Start date
- Thread starter
- #3
With the BIOS active it is probably trying to find a SCSI drive to boot from. You disable the SCSI BIOS and you still find the drives, you just don't try to boot from them anymore.
Ed Fair
Give the wrong symptoms, get the wrong solutions.
Ed Fair
Give the wrong symptoms, get the wrong solutions.
- Thread starter
- #5
most BIOS allow you to specify boot order. Until you can install an operating system on your new SCSI drive, you'll want to make sure that the drive containing your current OS is earlier than the SCSI drive in your boot order.
Every BIOS is different - usaully you can see a message when the computer first powers on instructing you to press some key or another for setup. On my Award BIOS, i have to press the Del key; others use the Esc key, others use function keys. Once you're in the BIOS, look for "Boot order"
Every BIOS is different - usaully you can see a message when the computer first powers on instructing you to press some key or another for setup. On my Award BIOS, i have to press the Del key; others use the Esc key, others use function keys. Once you're in the BIOS, look for "Boot order"
- Status
Similar threads
