Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can you use a AMD K6 475 as a CPU for NT Server?
- Thread starter DougP
- Start date
MasterRacker
New member
No reason I'm aware of that you shouldn't. From what I've seen the AMD chips run Microsoft OSes better than Intel ones do. <p> Jeff<br><a href=mailto: masterracker@hotmail.com> masterracker@hotmail.com</a><br><a href= > </a><br>
Hi DougP<br>
<br>
You can bet your first born on that one. I started out using AMD with their 386 chip and have not stopped. Recently I've run NT Server on an AMD K6II at 350 Mhz and now I'm using a AMD K6III at 450 Mhz with no problems.<br>
<br>
<br>
You can bet your first born on that one. I started out using AMD with their 386 chip and have not stopped. Recently I've run NT Server on an AMD K6II at 350 Mhz and now I'm using a AMD K6III at 450 Mhz with no problems.<br>
<br>
NTGeek
IS-IT--Management
I have a AMD K6-2 350 and 450 running 4.0 server SP5 with no problems. Memory is key, I have 500MB RAM in each.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
