Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can winsock talk to a plc that uses only Eip/Cip protocols?

Status
Not open for further replies.

tedsmith

Programmer
Nov 23, 2000
1,762
AU
The PLC in question uses only Eip/Cip protocol and not Tcpip.
Has anyone tried this or any specific info as to what vb6 code would be needed?
 
In which case it's pretty hard to get VB to talk to it directly. Technically it runs over TCP/IP, which would suggest winsock could work - but it runs at the application layer, so the reality is that you effectively would need to write yourself a driver for it ...

You might want to look at something like
 
Yeah for $900! Cheaper to use an Ethernet to RS232 adapter for $100.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top