Can we set different FLASH TIME for each extension

[Pabxer]

Hi everyone !

We have some Panasonic telephones (KX-T2365, KX-TSC8MXW) which have flash time about 500ms. That is too much for MD110, so flash option (to transfer a call) won't work on these telephones.

We are soon going to have MD110, BC11 so I was wondering is it possible in MD110 to set different flash time for each extension. For example, for Panasonic extensions to set 500ms and for the rest 100ms ?

If not, is there any other way to adjust these flash time parameters so that we could still use this feature on Panasonic telephones ?

Thanks

 

[DUFQI]

No - you can't.
But most telephones allow changing flashtime in setup.
DUFQI

 

[megglesfield]

I have come across the same problem with panasonic phones.On this model the TLB (flash time) can not be changed easily, but they do support earth recall to the PABX, which will give you the same funcionality as flash. Only drawback is you need to have an earth at every pansonic outlet!!