Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can TM88V work with Micros e7 (serial connectivity)?
- Thread starter bellab
- Start date
Yes,
Below Ill put the Dips that need to be set on the printer itself. Also you may want to navigate over to your device settings on the configurator and ensure you have the correct interface and comm port selected. I'm not totally sure about e7 but i you probably need to tell the station which comm port you will be using.
Epson Dips
TM88 Serial
DS1 - 7 on
DS2 - all off
TM88 IDN
DS1 - 2 & 7 on
DS2 - 7 on
TM88 IP
DS1 - all off
DS2 - 1 & 8 on
Below Ill put the Dips that need to be set on the printer itself. Also you may want to navigate over to your device settings on the configurator and ensure you have the correct interface and comm port selected. I'm not totally sure about e7 but i you probably need to tell the station which comm port you will be using.
Epson Dips
TM88 Serial
DS1 - 7 on
DS2 - all off
TM88 IDN
DS1 - 2 & 7 on
DS2 - 7 on
TM88 IP
DS1 - all off
DS2 - 1 & 8 on
- Status
Similar threads
- Locked
- Question