marker2001
Vendor
How do I program the Partner VS to ring a calling group instead of the operator when the caller does not select an option in the auto attendant?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can Partner Mail VS timeout to calling group?
- Thread starter marker2001
- Start date
- Status
itpphoneguy
Technical User
Hi marker2001,
When you go into the attendant you are using, at the end of the selector codes (depending on release) you will see an option for zero / time-out. Change that to the group you want (71 through 74). I have done this before and it works well. Be aware that there will be no mailbox to cover the group unless you loop a station port around to a CO port and include the station in the calling group. You could give the station "line ownership" in that case.
-Chris
When you go into the attendant you are using, at the end of the selector codes (depending on release) you will see an option for zero / time-out. Change that to the group you want (71 through 74). I have done this before and it works well. Be aware that there will be no mailbox to cover the group unless you loop a station port around to a CO port and include the station in the calling group. You could give the station "line ownership" in that case.
-Chris
- Status
Similar threads
- Locked
- Question
- Locked
- Question