can not use slot 128 for cleaning slots

[Robert800]

Hello,
our migration went well expect i got this error on the "autochanger" when i try to make a inventory:

"can not use slot 128 for cleaning slots since it is in the available slots range. Please exclude this from the available slots range before setting aside this slot for cleaning slots"

Were do i change this?

 

[605]

You simply have to decrease the number of available slots first before you can assign it to become a cleaning slot.

 

[Robert800]

i had to turn on diagnostic mode thats why i didnt see it.

then i did an inventory but got this error:
cancellation: none;
completion code: ;
error message: \
Jukebox `Autochanger' is unavailable. nsrlcpd is not running for this jukebox.;
last update: 1212595192;
messages: ;
name: Autochanger;
operation instance: 12;
operation source: GUI jb op;
progress: ;
prompt: ;
prompt response: ;
start time: 1212595191;
status: retryable

So does that mean NetWorker library control program daemon (nsrlcpd) needs to be configuered in autochanger with jbconfig?

 

[605]

No - it will be started automatically. If it does not come up after some seconds, restart the NW client service on this node.

 

[Robert800]

thanks for the answer, looked in deamon.log and found this:
-------------------------------
06/04/08 18:16:47 nsrmmgd: Jukebox 'Autochanger' is not in a valid state for nsrlcpd update.
06/04/08 18:17:06 nsrd: Jukebox Autochanger is now disabled.
06/04/08 18:17:07 nsrmmgd: Disabling jukebox `Autochanger' due to a configuration problem. Correct the problem and re-enable the jukebox resource.
06/04/08 18:17:07 nsrlcpd #1: Jukebox `Autochanger' is exiting. The jukebox is no longer managed by nsrlcpd.
06/04/08 18:17:07 nsrmmgd: Jukebox 'Autochanger' is not in a valid state for nsrlcpd update.
06/04/08 18:17:09 nsrd: Jukebox Autochanger is now enabled.
06/04/08 18:17:10 nsrmmgd: Started nsrlcpd on host `backupsrv' with command line options '-s backupsrv.fr.net -N 1 -n 1 '.
06/04/08 18:17:11 nsrlcpd #1: Starting program `nsrlcpd #1', with process ID 1472, on HOST backupsrv.fr.net.
06/04/08 18:17:14 nsrlcpd #1: Creating Jukebox `Autochanger'
06/04/08 18:17:16 nsrlcpd #1: Configuring Jukebox `Autochanger'
In update_scsi_bus_map: open_bus invalid on nadapters = 5
06/04/08 18:17:16 nsrmmgd: lcpd 1 at host backupsrv.fr.net reported error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
' for the command `3'.
06/04/08 18:17:16 nsrmmgd: Configuration of jukebox `Autochanger' failed with the following error: 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
06/04/08 18:17:16 nsrmmgd: Jukebox 'Autochanger' is unavailable. The config command failed on nsrlcpd 1 for host `backupsrv'. Retrying..
06/04/08 18:17:16 nsrmmgd: mgd_process_admin_response: failed to process response for command 3 from lcpd 1 at host backupsrv.fr.net with error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
06/04/08 18:17:16 nsrmmgd: nsrlcpd response processing failed with error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
06/04/08 18:18:17 nsrlcpd #1: Jukebox `Autochanger' is exiting. The jukebox is no longer managed by nsrlcpd.
06/04/08 18:18:19 nsrlcpd #1: Creating Jukebox `Autochanger'
06/04/08 18:18:21 nsrlcpd #1: Configuring Jukebox `Autochanger'
06/04/08 18:18:21 nsrmmgd: lcpd 1 at host backupsrv.fr.net reported error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
' for the command `3'.
06/04/08 18:18:21 nsrmmgd: Configuration of jukebox `Autochanger' failed with the following error: 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
06/04/08 18:18:21 nsrmmgd: Jukebox 'Autochanger' is unavailable. The config command failed on nsrlcpd 1 for host `backupsrv'. Retrying..
06/04/08 18:18:21 nsrmmgd: mgd_process_admin_response: failed to process response for command 3 from lcpd 1 at host backupsrv.fr.net with error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
06/04/08 18:18:21 nsrmmgd: nsrlcpd response processing failed with error 'Jukebox:Autochanger failed opening scsidev@14.0.0 error:smci_open: Could not open jukebox
(4)
'.
----------------------------------------------------

and there should be no problem with the scsi cabels as its the same as before and then there were no problem with this on my old system NW 7.2.1 32 bit. The only thing i have done is upgraded to Nw 7.3.3 64 bit all are same (server name etc) and backup to frc discs are no problem and i see all saveset. But need to clone all data to tape

any idea?

 

[Robert800]

inquire command:

In update_scsi_bus_map: open_bus invalid on nadapters = 5

scsidev@0.0.0:TEAC DVD-ROM DV28EV D.AE|CD-ROM

scsidev@1.0.0:IFT A24F-G2224-1 347B|Disk, \\.\PHYSICALDRIVE0

S/N: 09E58B04855B2900

WWNN=200000D02309E58B

scsidev@1.0.1:IFT A24F-G2224-1 347B|Disk, \\.\PHYSICALDRIVE1

S/N: 09E58B7BB36C9500

WWNN=200000D02309E58B

scsidev@5.0.0ell VIRTUAL DISK 1028|Disk

WWNN=600508E00000000015E7AC1C05676F0D

scsidev@5.8.0P BACKPLANE 1.05|(Unknown Device Type d)

ATNN=DP BACKPLANE000000

scsidev@6.1.0:HP Ultrium 3-SCSI G39Z|Tape, \\.\Tape0

S/N: HU10550857

ATNN=HP Ultrium 3-SCSI HU10550857

WWNN=50060B00005C24D6

scsidev@6.2.0:HP Ultrium 3-SCSI G39Z|Tape, \\.\Tape1

S/N: HU10616AT5

ATNN=HP Ultrium 3-SCSI HU10616AT5

WWNN=50060B000079B39A

scsidev@7.0.0:ATL P2000 001E|Autochanger (Jukebox)

S/N: bk1

ATNN=ATL P2000 bk1

IENN=00E09EFFFF0AB116

WWNN=100000E09E0AB116

scsidev@7.0.1:ATL P2000 001E|Autochanger (Jukebox)

S/N: bk2

ATNN=ATL P2000 bk2

IENN=00E09EFFFF0AB116

WWNN=100000E09E0AB116

 

[Robert800]

problem solved was wrong scsi address did a jbconfig and now inventory is working.