Can not use PDM--Please HELP

[MichaelDay]

I am using PIX 506E with Windows 2000 Server. Whenever I try to access to PDM with this address:

https://192.168.1.1

It promt to me "There is a problem with your secutiry certificate" SO If I press Yes, then it promt me for username and password. I enter the PDM username and password, it takes me this page"

"The Cisco PIX Device Manager has started in another browser window. If you wish, you may close this window"

And it pops up a window like this" The page cannot be displayed"

What do I do now to fix it? PLease help.

Thanks

 

[themut]

If there's a problem with the certificate then try to generate it again:

ca zeroize rsa
ca generate rsa key <size>
ca save all


and try to access PDM again. If it fails try to use Netscape and see if it experiences the same problem.

 

[MichaelDay]

Thank you TheMut;
I am very new to PIX. Could you please show me how to do this:

ca zeroize rsa
ca generate rsa key <size>
ca save all

Where and how?

I tried with Netscape, it say that I have to enable the Java. THen I check the Java preference in Netscape. It is enabled. And still giving me error

 

[themut]

Access the PIX through the console port, go to enable mode &quot;enable&quot; then to configuration mode &quot;config t&quot; and type the commands previously advised. The PDM Configuration Guide can give you further information:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pdm/v_30/pdm_ig/index.htm