Can not enable PPPoE on the same interface as vpdn.

[Ferrocki]

Hello all,

I'm trying to set up a PIX 506e FW for a company so that we can PPTP to the PIX and it can get an IP from the ISP.

PPTP is working fine, but when I set up PPoE for the outside interface it gives me the following error:

PIX>ip address outside pppoe setroute
Can not enable PPPoE on the same interface as vpdn.

Details:

vpdn group PPTP_VPN accept dialin pptp
vpdn group PPTP_VPN ppp authentication pap
vpdn group PPTP_VPN ppp authentication chap
vpdn group PPTP_VPN ppp authentication mschap
vpdn group PPTP_VPN ppp encryption mppe auto
vpdn group PPTP_VPN client configuration address local VPNPool
vpdn group PPTP_VPN pptp echo 60
vpdn group PPTP_VPN client authentication local
vpdn group pppoex request dialout pppoe
vpdn group pppoex localname ***********@att.net
vpdn group pppoe ppp authentication pap
vpdn username fredsm password *********
vpdn enable outside

If I had to take a guess I thinking I cannot PPTP in and do PPoE out. If so, is there a workaround?

Thank you,

Ferrocki

 

[baddos]

I'm not sure that is possible with a dynamic IP address.