im going crazy trying to find out how i can set up this system so that they have access to 8 lines in one group and a seperate line for access to a paging system but when i assign the trunks and they dial 9 they get the highest line any one know of a workaround
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
can i use trunk group access with a kxtd1232 ver3
- Thread starter manersj
- Start date
You can put each compay phone line into a Truck Group {*401} TRKG 1 CO 1-2-3- TRKG 2 CO 4-5-6-7 TRKG 3 CO 8-9-10. Then Program a Flexible CO Button {Group-CO} Button for each Company. When they press their group button it will access their group IDLE Line only.{PROGRAM GROUP BUTTON PRESS PROGRAM 99 THEN THE FLEXIBLE BUTTON # THEN "TRKG ".
If you need more help let me know.
If you need more help let me know.
- Status
Similar threads
- Locked
- Question
- Locked
- Question