Can I use Dymo 450 on Nice Application 8.9? 1

[Vilse]

Hi!

I try to use Dymo 450 on Nice Application 8.9 but i got problem.
When i install Nice application 8.9 i use a key that support "Dymo 400", after installation i an error window pop up that say the Media Library can not find "Dymo 400".

I have tried to enter setup menu for "Dymo 450" and change the driver to "Dymo 400". After that the error Message no longer pops up.
The problem is that the printer prints on every second label.

My question is if there is way to use Dymo 450 running on Nice Application 8.9 that support Dymo 400.
Is it possible to change the driver instructions so Nice Application 8.9 think that Dymo 400 is in use but the the driver for dymo 450 is installed?

/Vilse

 

[nice12345]

there is a HF for dymo 400 you can find here

https://www.extranice.com/EIS/Pages/searchresults.aspx?k=dymo&s=All Sites

on the spare parts list the printer listed is NICE part number 605B0011-51 Label printer, DYMO LW400 (For 8.9, NICE Perform Release 3)

 

[Vilse]

Thanks for reply, but...

It seems that HF for dym 400 didn´t work.

In the HF instruction it says that this HF is for Nice Application 8.9 with SP3, I have Nice Application 8.9 SP4 and this version already have support for USB .
I think that this HF:s is already implented in Nice App. 8.9 SP4, or am i wrong?

I tried to use a Dymo LW400 and then installed Nice App. After installation i reboot the system. After rebooting the system "Media Library" and "Media Print Server" starts.

After that i open Administrator, and add new Media Library with the network adress "127.0.0.1). After i have added the media library the printer starts to print out several labels with the same text (Logger number and date), it continues print out until the printer is out of paper.

In the task bar down to the right (windows task bar) i can see a printer icon appear and dissapear even if the printer is out of labels and ballon says that the printer is out of paper.


Is it something with the settings i have missed or what? I am verry frustrated=)

 

[nice12345]

yep HF included in Sp4. have a look here

https://www.extranice.com/EIS/Produ...Reinitializing the Media Library Database.PDF

also you can clear printer queue by going into maintenance mode.

https://www.extranice.com/EIS/Produ...ions Installation Guide 8.9 - Revision A1.pdf

also

https://www.extranice.com/EIS/Pages/searchresults.aspx?k=media library&s=All Sites

wouldnt use 127.0.0.1 isnt recommended by NICE

 

[Vilse]

Finally it work!==)

Thankyou verry mutch.

I tried to reinstall everything (maybe not necessary) and use the real ip adress and not the local ip adress (127.0.0.1).

No i have one more problem, a really hard one i am afraid but i will open another thread for that.

Once more thankyou verry mutch!!

/Vilse