Can i NUTRI to R1 number?

[safron]

Hi guys!

Recently had a DDI range changed, now having to use NUTRI to map onto extn range.
Problem is R1 is on the old DDI range. I doubt i can NUTRI to this. Is there anyway this can utilised if your ddi range does not map directly?

thanks.

Saf!

 

[whosrdaddy]

did you try it?
My guess is that it should work, as long as the callingparty is external.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[safron]

Didnt try as not sure what numtyp, cnvtyp to use but i'll have a play!

Thanks!

 

[whosrdaddy]

map it like you would map an extension from the old DDI range.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[safron]

The new ddi's map ok using the same NUTRI, also If i make the R1 number a generic it rings ok.
But DDI to the R1 gives number not in service??
My trace on SLP60 shows we send an outgoing disconnect.
Trace on Calfrmtru show (entnopsta) shows 'switch congestion - lack of resources'


THANKS!

 

[safron]

Guys,

when they changed the DDI range they didnt order CLI presentation on the cct...DOH!!

This is evident from the traces.

Sorry and thanks!

Saf!