Can I have 2 voice mails on the sme 2616?

[covantae]

I have 2 dns on a 2616. I want to have 2 mail boxes on the phone with their own message waiting lamps.. Is there a way too do this ????

 

[wdhb]

If you have MMail 13, Call Pilot & Rls25

 

[PMcCallum50]

The same is true with Octel Aria. The KEY assignment to use is XMWK. Note, to use XMWK, the key (ext) must be programmed before programming the Key XMWK. Example
On a m2616 for example you can
key 05 scr 5000
key 13 xmw 5800 5000 (5800 is the message center or vmail # and 5000 is the dn or ext) or for a m3904

04 MCR 3344 0 MARP
05 XMWK 5800 3344
if you want a multiple call ring with the extended message waiting key which can be displayed on any and all phones with the same mcr (I have 2 phones which show when a vmail is waiting on ext 3344)

 

[matthew517]

LD 11 – Configure the class of service option for the Extended Message Waiting Key (XMWK)
and its LEDs on the Meridian 1 proprietary sets.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data
TYPE: aaaa Type of set.
aaaa = 2006, 2008, 2016, 2216, 2616.
...
CLS
MWA
LMPX
Class of service option.
Message Waiting Allowed.
(MWD) = Message Waiting Denied.
The red LED on the Meridian 1 proprietary sets reflects
the status of the mailbox associated with both the PDNs
and non-PDNs with the associated Extended Message
Waiting Keys (XMWKs) or the Remote Message Waiting
Keys (RMWKs).
(LMPN) = The red LED on Meridian 1 proprietary sets
reflect the status of the mailbox associated with the
PDNs.
...
KEY
xx XMWK xxxx yyyy
Telephone function key assignments.
Extended Message Waiting indication key
Where:
xx = key number
xxxx = Message Center DN
yyyy = mailbox DN
Note: XWMK cannot be configured on key 0.

 

[johnpoole]

i had a similar problem with shift workers, without having the pkg on for extended mess waiting, i used analog dialtone to light neon lights for each of three different users, the dept # did a time fo day to the correct mb for that shift and standard mb did the rest.