Can I do this?

[nascomm1]

I have a customer with two 206 rel. 4.1 in a 2 card carrier he needs to add an additional 4 lines. I suspect these are plain partner cards.

Can I reuse these in a 5 slot carrier with a primary processor module and a 400 card?

Thanks in advance

 

[dagwoodsystems]

I dunno what you mean by "plain" Partner cards. But if you're asking whether older cards will fit into a newer 5-Slot backplane, the answer is YES.

 

[ringtone]

Sure you can!

 

[nascomm1]

Dagwood,

I mean by plain that there is no processor card at all only 2 206 cards a 2 slot carrier and thats it for a 4X6 system.

We have a 5 slot carrier kicking around with a processor module and I was wondering if the 206's would just drop in and play nice.

What I'm gathering is that much of the partner stuff is reverse compatible with the first issue stuff?

 

[skip555]

you need to add a processor , any will do , partner , partner plus or partner two would be cheap but why not just use a ACS and the existing two 206s rather than the 400

 

[nascomm1]

Thanks for all the great info.