can I connect paging amp to blk/slate pair on mics

[thephoneboy]

I am not sure why I have such hard time with Paging connecting to MICS. Must be getting old. Im changing from a system that had C.O. Port connected toviking PI-1 and then to a amplifier. I would like to page both the amp (external) and over the phones at the same time. Any help would be appreciated.

thephoneboy

 

[bkrike]

This is a job for your vendor. He will be able to make the proper connections, and then to program the system so that your paging works the way you desire.

 

[thephoneboy]

Thanks. Now i really feel bad. I am the vender. I will figure it out. Thanks for your reply.

thephoneboy

 

[bkrike]

Oh..sorry.
Connect the page equipment to BK/SL
If the phones are in page zone1, feature 631 will hit the speakers and internal, feature 630 will hit speakers and all zones.
You can program feature buttons to hit the zones of your choice

 

[telemarv]

Paging output is BL/SL of the P2 Amphenol (2nd station connection). Page sets and external page port at the same time is F63.

 

[galfaro]

Depending on your page zone, default is zone 1. So paging thru phones and speakers is F631, with zone 1, F632 with zone 2, etc.
Gabriel

 

[thephoneboy]

Connected as described and it worked great. Thanks you for your time. Sincerely

thephoneboy