Can I change the A number? 1

[anticristo]

Hi to all.

I just wonder how can I change the A number of a extension when I call outside. For example, an extension in a group shows the master number.

Thanks!

 

[bpetya]

Hi Anticristo!

NUTRI:ENTRY=old_number, TRC=old_number_digit, PRE= new_number, CNVTYP=1, NUMTYP=10, (ROU=xx) ;

NUTRI:ENTRY=7512, TRC=4, PRE=7200, CNVTYP=1, NUMTYP=10;

(7512 extension number, and we will send to outside 7200.

Peter

 

[whosrdaddy]

Correct answer,
please do not forget to set ADC digit 10 of the extension to active it's clip or else you won't be able to change it...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[anticristo]

Thanks you guys for your quick reply.

I did all steps but it didn't work. In this MD 110 all extension has 3 digits, so I used the command this way:

NUTRI:ENTRY=103, TRC=3, PRE=150, CNVTYP=1, NUMTYP=10;

I tried setting off and on the ADC's 10th digit and still showing the original number (when I switch off to 0, it shows only the area code).

Also, I used whit the ROU and still showing the original number (XXX0103).

I tried these way:

NUTRI:ENTRY=0103, TRC=4, PRE=0150, CNVTYP=1, NUMTYP=10;
NUTRI:ENTRY=0103, TRC=3, PRE=XXX0150, CNVTYP=1, NUMTYP=10;
NUTRI:ENTRY=103, TRC=3, PRE=XXX0150, CNVTYP=1, NUMTYP=10;


Any help?

 

[whosrdaddy]

I suppose your extension is 103?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[mundus]

Try:
NUTRI:ENTRY=103, TRC=3, PRE=150, CNVTYP=1, NUMTYP=10; and
NUTRI:ENTRY=103, TRC=3, PRE=150, CNVTYP=1, NUMTYP=11;

 

[dstrang1]

Don't forget to set D10 in the serv parameter for the route to allow for Number Conversion.

Also, the value for D2 in ADC for the dest code for this route should agree with the numtyp in the NUTRI entry (public or private).

Good luck,

Dave Strang

 

[FlavioMiranda]

as I make to monitor trunks of md110

 

[anticristo]

Hello my friends. I did as dstrang suggest and worked!. I just changed the D10 in trunk and it did work! ... Thanks you all for ya help! Im very thankfull