Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can ASA be configured to connect to MM V3.0
- Thread starter connor1
- Start date
Irish1Pat
Vendor
- Sep 26, 2006
- 97
What is your system configuartion for backend, MSS?
Not sure there is another method to remotely access an MAS other than using network connection and RDP (Windows limits). If your PC is connected to the corporate LAN, then it is a simple RDP right into the MAS.
If you want to connect to the MSS for CLI (command line interface), then just setup ASA (terminal 4410, 8N1) to dial the MSS and login using a login having CLI interface. (Sometimes this is limited to the tsc login.)
An alternative is to dial into the MSS (network connection not ASA) and login using a ppp-enabled login. Once connected, then use a browser straight into the MSS. Don't think at this point one can use ASA. This avoids having to connect to the MAS then browse over to the MSS. Of course this limits your ability to go back to the MAS for anything unless you disconnect from the MSS first.
Pat
Not sure there is another method to remotely access an MAS other than using network connection and RDP (Windows limits). If your PC is connected to the corporate LAN, then it is a simple RDP right into the MAS.
If you want to connect to the MSS for CLI (command line interface), then just setup ASA (terminal 4410, 8N1) to dial the MSS and login using a login having CLI interface. (Sometimes this is limited to the tsc login.)
An alternative is to dial into the MSS (network connection not ASA) and login using a ppp-enabled login. Once connected, then use a browser straight into the MSS. Don't think at this point one can use ASA. This avoids having to connect to the MAS then browse over to the MSS. Of course this limits your ability to go back to the MAS for anything unless you disconnect from the MSS first.
Pat
- Status
Similar threads
- Locked
- Question