Hello I am having a problem with a BCM 400 running 3.7 software. The BCM was in trouble and all the lights were flashing so we changed out the hard drive and that stabilized the system... The problem now is that LAN 1 & 2 along with the serial port are inaccessible. When we ping LAN 1 we get server unreachable LAN 2 pings ok.. But cannot telnet or bring up the GUI interface. So we also changed the mother board just in case of the leaky capacitor problem. I have accessed tons of BCM and never had this problem before and now I'm stuck with customer orders to make programming changes but cant.. Please if anybody can help it would be greatly appreciated..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
