Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can a Mitel 5224 and 5207 tag its packets?
- Thread starter eldee99
- Start date
option 1 - Yes. Remove power from the set, press the Vol up button and reapply power. This will take you into configuration mode of the set. You can statically set the VLAN ID in network settings.
TIP - instead of removing power you may be able to press both volume buttons, release only the volume down button, press 234 on dial pad and then release volume up button.
Option 2 - ??? I don't know for sure. Perhaps someone else here does.
Good Luck.
**************************************
My Biggest problem is that I almost always believe what I tell myself.
TIP - instead of removing power you may be able to press both volume buttons, release only the volume down button, press 234 on dial pad and then release volume up button.
Option 2 - ??? I don't know for sure. Perhaps someone else here does.
Good Luck.
**************************************
My Biggest problem is that I almost always believe what I tell myself.
- Thread starter
- #3
- Thread starter
- #5
- Status
Similar threads
