calls have no ringing tone thru faxserver

[cuneyt2020]

Hi,system is VERSION=CXP1010101/2/BC12SP5/R2A

There is a telecom route to MD110 (route 7) and md110 has a route to faxserver (Rightfax) (route73)

[tt]

<rodap:ROU=73&7;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
73 SL60 H'00000350 H'15580000 H'46200010 NO
7 SL60 H'00000310 H'14400000 H'04010000 NO

END

<rocap:ROU=73&7;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
73 0110000000000010 7 0110000001 0 30 128 00151515 111100000031 111101
7 7110000000000010 4 2100100001 0 30 128 00151515 010100000030 111101


Regardless of faxserver, when a call comes to an extension thru route 7 the calling guy can hear the ringing tone and the speech is ok...

But when a guy sends a fax to a DID number(3844) , defined on MD to be diverted to route 73 no ringing tone was heared.
But fax sending and recieving is ok.

<nutrP:entry=3844;
NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
3844 0 4 8458 0
END
<roddp:deST=8458;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
8458 73 2005000000000250000000000 0 5 0

[/tt]


How can i manage to send the ring tone to PSTN customer which is trying to send fax via route 73 to Faxserver?

Rgrds.

 

[TripleT]

It sounds as though the Faxserver does not send Ring tone.

At the moment you have route 73 set to use the Ring Tone from the Fax Server.

Try setting D7 of the Sig Parameter to 1 on Route 73.

This will generate Ring Tone from Within the MD110 for calls to the Fax Server.