Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Callpilot VPIM/AMIS

Status
Not open for further replies.

forcetranquille

Technical User
Feb 13, 2006
218
FR
Hello guys,

I need to install VPIM between to Callpilot. Do you know if the BCM need to be in networking with the other pbx via MCDN or not ?

Thanks

French Technical Engineer
 
If memory serves me right, you only need MCDN if you are trying to share PSTN access across systems (Toll bypass, TAT, etc). Check the Network Configuration guide, but I'm 99% sure you do not need MCDN.

Just watch out if you are using SIP trunking on a system before R3.0. The MWI was not originally suppurted on the SIP trunks.

Good Luck,

gabber4858
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top