I have CP 4.0 and have added peps to the server and now the Tandberg Drive Schedule will not run. The CP server shows me no errors. The schedule just disappears after the time lapses. However I CAN do a manual backup. Before I remove and change the Peps does anyone have a solution for me.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CallPilot Tandberg Backup Not Starting
- Thread starter telhyme
- Start date
strmwalker
Technical User
can you get into callpilot at the sever level?if so look
at the devise manager and make sure callpilot sees the
tape drive.is this a 201i or what ?
no problems only solutions
strmwalker
at the devise manager and make sure callpilot sees the
tape drive.is this a 201i or what ?
no problems only solutions
strmwalker
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question