CallPilot OLI Setup

[warshawa]

We have implemented a PRI circuit and ported our numbers to it. When someone receives a notification call from the voice mail system it is consistently using one of the ported numbers, not the PRI main number (nor a proper number that works well). With the phone sets I am able to control the outbound caller ID by setting the OLI value. Is there somewhere that I can set the outbound value used when the calls are being initiated by CallPilot?

We are using a BCM 400 v4.

Thank you for your assistance.

-Adam

 

[Deweyhumbolt]

Same setting as sets, OLI. You need to check all your Application DNs.

Adversity is Opportunity

 

[warshawa]

Thank you. Makes perfect sense.