When you dial into a voice tree and make a selection to go to the next level, you are sometimes dropped all together. On the channel monitor, there are still plenty of available channels. This only happens in 1 of 20 calls but it is not a once a month problem that I can pass off as "well, it happens". When we actually sat down to try to find the problem, it works fine (cruel irony). Of course the problem is at it's worst when the boss is glaring at you over your shoulder. Any ideas on how to remedy or even track this problem.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callpilot drops calls 1
- Thread starter Jay102
- Start date
-
1
- #2
lots and lots of tracing calls, entc command in ld 80, sounds like a single bad port.. disable that port untill you can get hardware.. not very likley that a single port is softwar-ed wronge, but it could be if the selection is to an external number.. sounds like a hardware problem
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
- Locked
- Question
