CallPilot channel upgrade 1

[TOVERBO]

Want to upgrade # of channels on our 703t server running cp 3.0 from 24 to 28. Read the documentation - wasn't able to get all my questions answered. Wondering if anyone would have a break down - or a some what step by step of how this is done.
I am just reading and testing a couple things on the 81c while I am waiting for the software to arrive.
Created the dummy acd 2008 set for the next available channel but it doesn't look the same as the others. Looks like a regular ACD set. AACS set to no - can't change that setting to yes.
Is this something that won't set up correctly till the software is installed in the cp server?

 

[sandyml]

Some of those prompts, like AACS, are changed by the system when CallPilot acquires the set. And that won't happen until you perform your keycode upgrade, run Configuration Wizard to add those additional ports, and reboot.

Just make sure that the 2008 you program has these prompts at CLS: WTA, VCE, MMA. If you are using units 16-31, it needs to have FLXA, VCE, MMA. Program the keys like the ones you have.

 

[TOVERBO]

Thanks for confirming that. Seems straight fwd with the wizzard. Any other tips appreciated.