finnaddict
Vendor
We have a customer who would like to change from 3 to 4 digit DNs with the new PRI but I am not sure how to make the change in the CP 150 without loosing my keycodes ?
Thanks,
Thanks,
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callpilot Changing from 3 to 4 digit mailboxes
- Thread starter finnaddict
- Start date
- Status
curlycord
Programmer
You need to re-install programming.
Did you not save the key code entries? they can be re-entered since system/serial d does not change.
If you did not save them you can get them re-generated via a Nortel vendor from Nortels KRS system.
=----(((((((((()----=
curlycord
Did you not save the key code entries? they can be re-entered since system/serial d does not change.
If you did not save them you can get them re-generated via a Nortel vendor from Nortels KRS system.
=----(((((((((()----=
curlycord
curlycord
Programmer
Side note, just because you are getting a PRI dores not mean you need to change the DN lenght on the KSU.
You could have 10 digits recieved and still be able to point a DID/Target to a 3 digit phone.
=----(((((((((()----=
curlycord
You could have 10 digits recieved and still be able to point a DID/Target to a 3 digit phone.
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question