Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Callpilot 200I questions

Status
Not open for further replies.

Rosesam

IS-IT--Management
Sep 14, 2022
54
US
Hello all,

Managed to snag a callpilot for cheap (should work but wont know till the PSU gets here tomorrow)

However I cant seem to find any info on the 200i, Plenty on the 201 and 202 however. So I've got a few questions.

1. Does the Multi IO cable still work ont the 200? I see some posts about needing a whole box to get this working...
2. Is a funky cable still needed to get this working with a SSC vs a CPPM? (also need more info on that as PBX cookbook has nothing)
3. Should I ditch this 200 and try and get a 201 even if it works?
 
Can you post a photo of the "200" please as I don't recall coming across one.
I do have some "200" Call Pilot CD software images that might be of any help.

Use a FTP client such a FileZilla FTP Client
IP = somertel.ddns.net
Login and password = Call_Pilot
Have FTP over TLS enabled.

Once logged in, navigate to the "Call Pilot 200I Recovery Image" folder.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
IMG_20230319_205744_thklgf.jpg
84dfec61-eaa9-45d9-91a4-7b2acb2efabb_yf53ph.jpg
IMG_20230319_205729_fn18vd.jpg
IMG_20230319_205735_cmlsdr.jpg




See attached. Listing states its a 200. I'll check your ftp out
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top