I have callpilot 2.0 installed and I have never been able to get the IVR ports working with Symposium 4.2 SCCS. I have gave IVR treatment using the default IVR DN and I see it active in the channel monitor but no recording from the application I built and it keeps ringing...when I hang up it keeps the CP IVR port active...is there a setting in the CP ports in pbx that was incorrectly programmed...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callpilot 2.0 IVR Port issue
- Thread starter nemesis51
- Start date
- Thread starter
- #2
lretrievers
Vendor
The Meridian ports may be the problem. I had to shut mail completely down and remove the AML before the Call Pilot was able to give the treatment.
- Status
Similar threads
- Locked
- Question
- Locked
- Question