Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

callpilot 1002rp raid drives faulty

Status
Not open for further replies.

kthoma1

Technical User
Feb 4, 2011
1
US
I am working on a 1002rp rls. 4 and all 3 drives on channel 2 are red in mega consul. replaced SCSI power harness and drive are stii red after rebooting. Do I need to rebulid the out of service drives?
 
takes about 2 hrs per drive, nortel recommends to rebuild them 1 at a time.

some techs split the raid when they install patches (as per nortel recommendation)

are they all on the same controller? could be a bad controller on the RAID if you can't rebuild them?

make sure you have a backup just incase.....

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
oops sorry, you said they are all on channel 2.... so it would seem that either a tech did it and never rebuilt them, does not seem like it all 3 would die at the same time.....

try rebuilding 1 at a time but make sure you have a current backup just incase.

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top