Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CallPilot 100 to 150
- Thread starter Seajumper
- Start date
ptstechnician
Vendor
I'm going to take a stab at this and say no. If you can, backup the info on the CP 100 and restore it to the CP 150. I haven't tried this myself.
RikRodgers
Vendor
Are you just upgrading the software on one CP, or copying programming to a completly new one?
- Thread starter
- #4
I don't know that answer for sure, but here is what I do know:
1- I've upgraded a bunch of CP's and have used the s/w loads from Nortels website for 100/150's interchangeably.
2- S/W level in both units would have to match to even consider the idea.
3- You are not going to wreck it by trying, it just won't restore. Backups and restores take time, so you will lose time if it doesn't. If you give it a whirl, post the results....I'd be curious.......
1- I've upgraded a bunch of CP's and have used the s/w loads from Nortels website for 100/150's interchangeably.
2- S/W level in both units would have to match to even consider the idea.
3- You are not going to wreck it by trying, it just won't restore. Backups and restores take time, so you will lose time if it doesn't. If you give it a whirl, post the results....I'd be curious.......
- Status
Similar threads
