Callpilot 100 Setup?

[DannyJC]

I am trying to setup V.M. for a service company. Need to be able to have someone who calls for emergency service after hours leave a message and have the system notify a pager that a message exists.

Does anyone have a completed programming record for a simular type of application that you could e-mail or some other documentation (a little less convoluted then Nortel's)with layouts or templates of configs that use CCR and pager notification.

Equipment

CICS w/ 8 lines 24 extensions and Rel. 6.1 software
Callpilot 100 with Rel 1.5 software and 18 mailboxes

Thanks,
Danny
dcallega@nassau.cv.net

 

[curlycord]

Log into F983 with your password and press MAILBOX, CHANGE, enter mail box number, press net untill you see outbound, change to pool #1.
Go into that mail box via F981 adn press 8, 6 and follow on screen prompts.
Change your main greeting to direct callers to that mail box number.
If you use CCR tree have a path setup to leave message at that mail box.

GL

http://www.spoctel.com

Authorized Nortel Dealer
Private email: sbwdaddy@yahoo.ca​

 

[scant000]

Hey gang- dumb question: will CallPilot 100 &/or 150 work off an 8X24 system?? Or only the ICS & up?

 

[Norstarguru]

CP100/150 require MICS or CICS 4.1 or higher to operate..

Norstarguru

As for the original conversation, Build the Mailbox point the CCR Path to LVMSG in that box, Go into the box press Admin and the lady will walk you through the off Prem Notification OPTION 6.