Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CallManager and Cisco 2851 Router with T-1 PRI

Status
Not open for further replies.

rodjor

Programmer
Mar 15, 2004
20
US
i am having a strange issue with my CallManager and 2851 Router with a T-1 PRI connection to the PBX. Users can dial into the VOIP network and dial out to the PBX no problem but when they enter voice mail or MeetingPlace and enter digits they are duplicated. For example if you dial into MeetingPlace and it prompts you for a meeting ID and you enter 1234, MeetingPlace receives 11223344. Any ideas on what maybe causing this?
 
Any translation issue going on here?

Have tried using the dialed analzer to verify routes and other programming?


[americanflag] SPC NVARNG
Tek-TIP Member 19,650
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top