calling 112 (911) on a SV8100 system not possible

[jeroentjed]

Hi all! (and a very beautiful 2023 to you)

I'm preparing a SV8100 to have a second life in a local community center. My SV8100 knowledge is a bit rusty but most of the things are solved out and working. One thing I can't get to work is the possibility to call the emergency number which is 112 in my country.
This must be available to any extension, if they are allowed outside calls or not and with or without prefix 0 for a trunk.

Somehow calling 112 is not possible at the moment. Who can give me some directions to tackle this problem?

regards,
Jeroen

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[CoralTech]

Toll restriction perhaps? Probably easiest way for you is to make 112 a VE and have it forward to dial 112 outside?

 

[jeroentjed]

Thanks CoralTech,

It's kinda solved. There was a problem with the voip provider.
Forwarding a VE to dial 112 is a very good idea.

Thanks!

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated