CallerID

[XCatalin]

We connect our MD110 with a router CISCO3640, trough E1 CAS 2Mbps digital line, using TLU76/3 card.
I check calling in both direction, all it’s OK.
When I call from CISCO to MD the CallerID it’s not displayed on MD digital extensions.
I programmed all parameters involved in CallerID displaying for route:
- RODAI command (VARO, VARI, VARC)
- KSCAP command (SERV: D8 and D9)
and for extension:
- KSCAP command (ADC: D3 and D4)

Someone help me to display CallerID.

 

[fcpli]

rocap d9 should be 1, is it?

 

[fcpli]

sorry, I meant serv d9

 

[XCatalin]

Thanks DynaText.
Now all it's OK.
Extension's parameter ADC (D3=1 & D4=0) are in charge for CallerID.