Folks!
I am facing a weird problem with the Definity and a compression voice system. The system is using ETSI, I captured some LOGS.
Is there any "guru" that can analyse the logs ?
I have been analyzed the LOG, the problem is in the callig part.
On more question, What are the codeset that Definity support ?
Hereafter is the log, as you can see I have problem in the calling party.
00 000000-- Sapi = 0
------0- C/R: Command
-------0 Extension Bit = with extension
01 0000000- TEI = 0
-------1 Extension Bit = no extension
00 0000000- N(S) = 0
-------0 I-Frame
00 0000000- N(R) = 0
-------0 P/F = 0
08 00001000 ProtocolDiscriminator DSS1
02 00000010 Length of CallReference = 2
80 1------- CallRef-Flag: Destination Side
-0000000 CallReference = 55
37 00110111 (CallReference)
07 00000111 MSG-Type: CONNECT
1E 00011110 I-Element: Progress Indicator
02 00000010 Length = 2
81 1------- Extension Bit = no extension
-00----- Coding Standard: CCITT
---0---- Spare
----0001 Location: private network serving local user
82 1------- Extension Bit = no extension
-0000010 Progress Description: destination address is non-ISDN
4C 01001100 I-Element: Connected Number
05 00000101 Length = 5
A1 1------- Extension Bit = no extension
-010---- Type of Number: national
----0001 Numbering Plan: ISDN/Telephony
36 0------- Spare
-0110110 Number digit: 6
31 0------- Spare
-0110001 Number digit: 1
36 0------- Spare
-0110110 Number digit: 6
32 0------- Spare
-0110010 Number digit: 2
97 10010111 I-Element: unknown
28 00101000 (not decoded)
0F 00001111 (not decoded)
52 01010010 (not decoded)
61 01100001 (not decoded)
69 01101001 (not decoded)
6D 01101101 (not decoded)
75 01110101 (not decoded)
6E 01101110 (not decoded)
64 01100100 (not decoded)
6F 01101111 (not decoded)
20 00100000 (not decoded)
46 01000110 (not decoded)
65 01100101 (not decoded)
72 01110010 (not decoded)
72 01110010 (not decoded)
65 01100101 (not decoded)
69 01101001 (not decoded)
Thank you very much!!!!
jmf
I am facing a weird problem with the Definity and a compression voice system. The system is using ETSI, I captured some LOGS.
Is there any "guru" that can analyse the logs ?
I have been analyzed the LOG, the problem is in the callig part.
On more question, What are the codeset that Definity support ?
Hereafter is the log, as you can see I have problem in the calling party.
00 000000-- Sapi = 0
------0- C/R: Command
-------0 Extension Bit = with extension
01 0000000- TEI = 0
-------1 Extension Bit = no extension
00 0000000- N(S) = 0
-------0 I-Frame
00 0000000- N(R) = 0
-------0 P/F = 0
08 00001000 ProtocolDiscriminator DSS1
02 00000010 Length of CallReference = 2
80 1------- CallRef-Flag: Destination Side
-0000000 CallReference = 55
37 00110111 (CallReference)
07 00000111 MSG-Type: CONNECT
1E 00011110 I-Element: Progress Indicator
02 00000010 Length = 2
81 1------- Extension Bit = no extension
-00----- Coding Standard: CCITT
---0---- Spare
----0001 Location: private network serving local user
82 1------- Extension Bit = no extension
-0000010 Progress Description: destination address is non-ISDN
4C 01001100 I-Element: Connected Number
05 00000101 Length = 5
A1 1------- Extension Bit = no extension
-010---- Type of Number: national
----0001 Numbering Plan: ISDN/Telephony
36 0------- Spare
-0110110 Number digit: 6
31 0------- Spare
-0110001 Number digit: 1
36 0------- Spare
-0110110 Number digit: 6
32 0------- Spare
-0110010 Number digit: 2
97 10010111 I-Element: unknown
28 00101000 (not decoded)
0F 00001111 (not decoded)
52 01010010 (not decoded)
61 01100001 (not decoded)
69 01101001 (not decoded)
6D 01101101 (not decoded)
75 01110101 (not decoded)
6E 01101110 (not decoded)
64 01100100 (not decoded)
6F 01101111 (not decoded)
20 00100000 (not decoded)
46 01000110 (not decoded)
65 01100101 (not decoded)
72 01110010 (not decoded)
72 01110010 (not decoded)
65 01100101 (not decoded)
69 01101001 (not decoded)
Thank you very much!!!!
jmf