Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caller ID? 1
- Thread starter rj2506
- Start date
-
1
- #2
Yes, provided the telco sends it (in North America anyways).
Assign the line to the set, then click on "Caller ID Set" under the line. Nothing else to do other than that.
Even if you haven't configured the caller ID set parameter on the line, the set will display the CLID info once the call has been answered.
If you are front ending all calls with an auto attendant, be sure that you have the AA set to answer at 2 rings, as the CLID is passed between rings 1 and 2.
Assign the line to the set, then click on "Caller ID Set" under the line. Nothing else to do other than that.
Even if you haven't configured the caller ID set parameter on the line, the set will display the CLID info once the call has been answered.
If you are front ending all calls with an auto attendant, be sure that you have the AA set to answer at 2 rings, as the CLID is passed between rings 1 and 2.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question