Caller ID Presentation not allowed , Option 61c

[LOD]

Hi all
Is it possible ,to change for one BRI Line the CLID for outgoing Calls , the best is ,if the machine set the flag presentation not allowd in the D-Channel

thanks for the replys .. Andre

 

[johnpoole]

you program the clid on a bri the same as any other station. post the tn as built..

john poole
bellsouth business
columbia,sc

 

[RS528]

If you don't want to send the CLID, change the PRES prompt to NO on your TSP in LD 27.
Or if you want to send an other CLID, use johnpool comment.

DN x..x yyyy Directory Number (x..x) and CLID table entry (yyyy)
- CT aaa Call Types for the DN (aaa = VCE or DTA)
- MCAL 1-(4)-8 Maximum Calls allowed per DN
- CLIP (YES) NO Calling Line Identification Presentation for incoming calls
- PRES (YES) NO Presentation of CLID to far-end on outgoing calls
- ANIE (0)-n ANI Entry
COLP (NO) YES Connected Line Identification Presentation