Caller ID on option 11

[chriso2000]

When we dial a number, the number is showing on a caller id display. I know that the number can be blocked from showing at the telco level but is it possible to program the meridian to block the number from showing when dialing from certain extension/phones?

 

[ArchibaldJCox]

I believe that these are the classes of service (CLS)you're looking for:

(DDGA) DN Display on other set Allowed
DDGD DN Display on other set Denied

(NAMA) Name Display on other set Allowed
NAMD Name Display on other set Denied

Arch

------

http://www.infoplusonline.com

Site Surveys
SourceBooks
Security Audits
Traffic Studies
Remote PBX Backups

 

[matthew517]

KEY xx aaa yyyy (cccc or D) zz..z basic-1
Telephone function key assignments
The following key assignments determine calling
options and features available to a telephone. Note that
KEY is prompted until just a carriage return <cr> is
entered.
Where:
• xx = key number
• aaa = key name or function
• yyyy = additional information required for the
key
• zz..z = additional information required for the key
aaa.
The cccc or D entry deals specifically with the Calling
Line identification feature. Where:
• cccc = CLID table entry of (0)-N, where N = the
value entered at the SIZE prompt in LD 15 minus
1.
• D = the character “D”. When the character “D” is
entered, the system searches the DN keys from
key 0 and up, to find a DN key with CLID table
entry. The CLID associated with the found DN
key will then be used.
KEY
Note: The position of the (cccc or D) field varies depending
on the key name or function.
You may enter a CLID table entry if aaa = ACD , HOT d,
HOT L, MCN, MCR, PVN, PVR, SCN or SCR.