caller ID number on new ext 1

[imeldesign]

I have added 27 analog phones in our new children's and preshcool building classrooms. I would like to change the outgoing caller ID to be the DID number for that ministry area rather than our main church number.
Can you give me the directions to do this in MOC? The outgoing number should be XXX-660-2426 and the extensions are four digit i.e. 2207.
Thanks in advance.

Melanie

 

[pave35]

Go to CM 5005>00 through 14 and find one of these bins that = NONE.
Assign there, the 10 digit number you want to project to the network (XXX-660-2426).
Then go to CM 1213 for each of the stations and assign the bin number you programmed in CM 5005.
Also make sure CM 1212 for those stations = NONE.

 

[imeldesign]

I think there already is a bin for each ministry area. I just find out which one it is which and then the process would be.??
F9
1213
F8
XXXX (ext #)
F8
bin#
F2

Just checking before I launch matworxs...

 

[pave35]

Bingo!

 

[imeldesign]

Have a star on me. Thanks

 

[ethereal112]

Sorry for the intrusion but I was venturing thru the threads and came across this one. Is this for a 2000IVs possibly?

 

[imeldesign]

2000 ips

 

[OzzieGeorge]

It is however the same on the IVS2 and IVS (aka ICS)