caller id mics 4.1 1

[telco71]

i have a mics with caller id cards and 4.1 software. the first set get name display on lines ringing in clid set to set 221 but everyone else has to answer the call and then caller id is displays on there sets. is there any way for all sets to see the caller id info before they answer the phone. is this one on nortel screw ups. did not want to upgrade to higher rel if possible the clid setting is only for one set as far as i see.
thanks
telco71

 

[curlycord]

You can use F811
Otherwise 6.1 upgrade or higher.

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[exsmogger]

If upgrading to R6.1 or higher is not an option, you could assign all ringing phones to a hunt group, and then assign the hunt group DN as the caller ID set.

Brian Cox
Brian Cox Telecom Services

http://www.linkedin.com/in/briancox1952

 

[curlycord]

Cheater!

Good one too!


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[curlycord]

I had a tech tell me at default new install if you dont enter the Auto DN that will get the Call ID then everyone will get C.I.

I have yet to test.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[exsmogger]

I'd like to know if that is a workaround too.

Brian Cox
Brian Cox Telecom Services

http://www.linkedin.com/in/briancox1952