Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID for analog stations.

Status
Not open for further replies.

KaztarT

Technical User
Oct 5, 2006
70
TR
Hi everybody I know there are a few the same questions but I tried all of the answers and it didnt work.I have S8500C with G650 at V14.

My problem is about not see the Caller number at analaog stations.I changed type 2500 to callerID,I also try both of the options at System-param. features(Bellcore etc.).I also try 3 kind of analog phones at different types.

I am using TN793CP as card HW13 FW010 .

Any ideas for me...

 
Have you played around with this on page 2 of the station form...

Per Station CPN - Send Calling Number? y

Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.
 
Put a trace up on the station and dial it from a cell phone. The trace should show that the digits are being presented to the station.

Kevin
 
also check page 1 of "change sys features" and check that BELLCORE is on the field for "Protocol for Caller ID Analog Terminals"

-CL
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top