Caller ID for Analog Extensions?

[TomMonger]

Hello again,

I successfully set up three CLID tables so that DIDs will be sent out externally to people with Caller ID. Since we have two different prefixes for our DIDs, I used two table(one for each prefix) and a third table for our main line (for the non-DID phonesets).

I then assigned an Entry to every phone in LD 20 to show the proper phone number prefix and DID extension ... making sure Key 00 was assigned the proper CLID entry (table, whatever).

My problem now is with analog (500) sets. How do I force analog sets to show a different CLID entry other than the default "0"?

Any help would be greatly appreciated!

Thanks!
-Tom in Scranton, PA

 

[wdhb]

DN 3352 0
The 0 after the DN is the CLID number, so if you want to CHG this, enter the DN number "space" "new CLID"

e.g. DN 3352 2

 

[TomMonger]

Thank you, WDHB! Worked like a charm!

-Tom