Caller ID Blocking Issues - 61C

[tahki]

I have a 61C - Release 24, Issue 25. In the last 2 months, we have been experiencing caller id blocked calls where you need to press *82 for our line to be identified. Our switch is not programmed for this nor do we have a PRI card in use. We have had our local provider remove the Caller ID Blocking feature from all our lines including the terminals they are associated with. I am posting the Net_Data and the RDB of the lines we believe are the correct ones we are dialing out on (we have had an independent vendor verify these lines on this RDB are the correct ones we dial out on). The local phone company translations tech tested dialing from one of our trunks through their switch and were able to place the call. I am totally new to the CDR & RDB and need assistance!
TYPE NET_DATA
CUST 00
OPT RTA
AC2
FNP YES
ISDN YES
PNI 1
PINX_DN
HNPA 415
HNXX
HLOC
LSC
RCNT 5
OCLI NO
TRNX YES
EXTT YES
FTOP FRES
VNR NO
NIT 8
FOPT 14
____
RDB:

REQ: prt
TYPE: rdb
CUST 0
ROUT 8

TYPE RDB
CUST 00
ROUT 8
DES 485-4500
TKTP COT
PRIV NO
SAT NO
RCLS EXT
DTRK NO
ISDN NO
PTYP ACO
AUTO YES
ICOG OGT
RANX NO
SRCH RRB
STEP
ACOD 805
CPP NO
TARG
CLEN 1
OABS
TIMR ICF 384
OGF 384
EOD 1024
DSI 34944
NRD 10112
DDL 70
ODT 1024
RGV 640
FLH 510
GRD 896
SFB 3
CRD 0
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 50
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
CDR YES
INC NO
LAST NO
QREC NO
OAL YES
AIA NO
OAN YES
OPD NO
NATL YES
MUS YES
MRT 32
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0


PAGE 002

FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

 

[PERRYPJ]

YOU DON'T HAPPEN TO HAVE MCI WORLDCOM FOR A LD VENDOR DO YOU

OLD ROLMEN WORKING ON NORTELS

 

[tahki]

Yes we do as a matter of fact.

 

[tahki]

When I use my test set on the TNs, I am able to dial straight through to the numbers we're having problems with so I am not sure if it is an MCI problem or something on our switch.

 

[PERRYPJ]

IT'S A MCI WORLDCOM PROBLEM, I'VE GONE THROUGH THIS WITH MCI WORLDCOM BEFORE. SOMETIMES WHEN YOU CALL OUT YOU GO OUT SOME ROUTES FROM MCI WORLDCOM THAT DO NOT TRANSFER THE CALLER ID, I NEVER GOT A RESEASON FROM MCI WORLDCOM. THE REASON I KNOW IS THAT I HAD MCI WORLDCOM ON MY HOME PHONE FOR LD AND MY DAUGHTER HAS A SERVICE THAT BLOCKS UNKNOWN NAME UNKOWN NUMBER CALLS FROM GETTING THROUGH UNLESS YOU ANNOUNCE YOUR NAME AND NUMBER.

LONG STORY MADE SHORT I WENT WITH SPRINT, PROBLEM FIXED


OLD ROLMEN WORKING ON NORTELS

 

[tahki]

Thanks for the information I had a feeling it was MCI - I tried a different code besides 9 that we used to use in the past and it allows the calls to be placed without incident so am using that as a work-around method.